Pushbuttons panel for Waveshare 7" HDMI LCD (H) Case by ywabiko
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This panel makes it easier to press the buttons of the LCD screen. Just glue it on.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 329
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
I have printed the beautifully designed Waveshare 7" HDMI LCD (H) Case by ywabiko and everything is great except the screen buttons - they are too deep and quite hard to push. So I installed Fusion 360 and made this panel that you can glue to the case to make pressing the buttons a breeze.
Sure, it would be a much better solution to integrate this panel into the original case design, but I have no skills to do that yet - this is my very first 3D model in general and I have never used 3D CAD software before.
So - it works for me, but I cannot guarantee it will work for everyone. Check if it fits OK before you glue it :)
Printed in PLA with 0.08 mm layer height, first layer 0.2 mm, 0.4 mm nozzle.