1 / 4
Box for Lucky 13 (Lucky 13, Easy 13, Mini 13)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A little box for holding a Lucky 13, Easy 13, or Mini 13 jointed figure from @soozafone.
- Ocena
- 0 / 5
- Polubienia
- 147
- Pobrania
- 622
- Wydruki
- 0
- Wyświetlenia
- 4182
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 2)Remiksy (1)Kolekcje (215)Powiązane
This is a small box/case for holding a single jointed figure from the Lucky 13 series by @soozafone. This one will also most likely work on Dummy 13, but it hasn’t been tested.
There are 2 parts: the lid and the box. The lid should simply sit on the top of the box cleanly. There are also three STL files included: one with both parts, another with just the box, and another with just the lid.