Lucky 13 Flagger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Accessories to dress your Lucky 13 like a traffic control flagger.
- Ocena
- 0 / 5
- Polubienia
- 35
- Pobrania
- 92
- Wydruki
- 0
- Wyświetlenia
- 619
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This remix has accessories to dress the lucky 13 like a traffic control flagger. Included is a hard hat, a flashlight with a wand, a stop/slow paddle to go on top of the original Lucky 13 pole, and separate stop and slow inlays to print in other colors.
*IMPORTANT ADVICE FOR PRINTING THE INLAYS*
If your printer is very accurate, you can print everything at 100%. Otherwise, try printing the inlays at 98% or so and do one at a time. This will allow you to test fit and print again at a different size if you need to.
Mine were able to friction fit with a firm but gentle push, but they're very snug.