Side Frame and Handle for Icom IC-7300 - 2 parts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The frame designed by AndrewBrierley for the ICOM IC-7300 looked great, but I couldn't fit it in my printer, the part…
- Ocena
- 0 / 5
- Polubienia
- 28
- Pobrania
- 262
- Wydruki
- 0
- Wyświetlenia
- 1555
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
The frame designed by AndrewBrierley for the ICOM IC-7300 looked great, but I couldn't fit it in my printer, the part is 280mm long. In order to print the item I needed to cut it in half. You will need to print two of each part, the A part will slide into the B part making a single rail that resembles the original. https://www.thingiverse.com/thing:3077443
8 - M4x8mm screws were used to attach the rail to the radio.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK2.5
Rafts:
No
Supports:
No
Resolution:
0.20mm
Infill:
40%
Filament: Generic ABS Black Post-Printing =============
The two ends should slide together in the dovetail, it should be a tight fit, glue or other methods could be used to secure them more.
Category: Electronics