1 / 3
VEX V5 battery holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For V5 battery. Stack up vertically to save space. Stabilizer to put 2 holder side by side
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 103
- Wydruki
- 0
- Wyświetlenia
- 842
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (11)Powiązane
This is the model for V5 battery. I put it at 15 degree to hold the batteries in place. There are cutouts for the battery indicator and the DC power plug. I print it out on the Prusa Mini with support on the back. I'm using VEX star screw ¼'' and nuts to connect the holder and the stabilizer together.
Adding another version for this. Adding Voronoi pattern to save materials, modify the base so no stabilizer is needed.
