Deburr Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made to hold AFA Tooling Deburr, Countersink and bits. I used the rugged box and holder for AFA tools to make this model
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 73
- Wydruki
- 2
- Wyświetlenia
- 911
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Thanks to J White and Whity for their models. I used them to get a box that packs away easy and keeps everything organized. With the added bit slots and tool brace on the top side nothing rattles around in the box.
I printed with PETG, used supports and a brim to keep everything flat and stuck. The slots for the bits are a little tight but fit. Most of the Parametric boxes use M3 bolts but the ones I had around the studio were not long enough so I used some .125" steel rod, worked pretty well.