Carrera Go Pfeiler Stütze / Carrera Go pillar support
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Carrera Go Pfeiler, Stütze verschiedene Höhen kein Support benötigt wenn möglich den Kugelanfang mit 0,12-0,16 mm…
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 121
- Wydruki
- 2
- Wyświetlenia
- 547
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
Carrera Go Pfeiler, Stütze verschiedene Höhen
kein Support benötigt
wenn möglich den Kugelanfang mit 0,12-0,16 mm Schichthöhe beginnen. Der rest kann mit 0,24 mm gedruckt werden
(z.B. mit Prusaslicer relativ einfach machbar)
Carrera Go pillar, support different heights
no support needed
if possible start the ball with 0,12-0,16mm layer height. the rest can be printed with 0,24 mm
(e.g. relatively easy to do with Prusaslicer)
Print Settings
Printer Brand:
Creality
Printer:
Ender 5
Rafts:
No
Supports:
No
Resolution:
0,12-0,24
Infill:
50
Filament: you want PLA
Category: 3D Printing