KLAMMA - Screw Mountable (REMIX)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Screw mountable under desk cable management system.
- Ocena
- 4,727 / 5
- Polubienia
- 75
- Pobrania
- 637
- Wydruki
- 14
- Wyświetlenia
- 1443
- Oceny
- 11
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
After printing a bunch of KLAMMA, i fell in love with them, but really wanted some that could be screw mounted. I wasn't super keen on the KLIPPT (KLAMMA v2) because it prints in 2 parts. So i decided to make some modifications to KLAMMA so it can be screw mounted.
Version 1 was a little difficult to screw in because the top of the clip got in the way, so I made Version 2 with holes in the top of the clip to allow a screw driver through.
The holes are 3mm in diameter with a countersunk section to the screw can sit flush, the holes in the top section to allow a screw driver through are 5mm.
The holes are designed to work with the smallest screws in IKEAS FIXA or TRIXIG screw packs. However, most hardware store will have an equivalent.