Hunter Douglas remote holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a holder for a round Hunter Douglas remote. The diameter of the remote is about 51.5 mm.
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 160
- Wydruki
- 1
- Wyświetlenia
- 482
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution
This is a wall mount holder for a round Hunter Douglas window blinds remote. It has small grooves to align the remote vertically, and finger holes to make removing it for changing the battery easier. I printed it in PLA on a Bambu Labs X1C. Because it is a friction fit, the “remote” variable may need to be adjusted for other printers/materials, to account for shrinkage. 0.4 mm change was enough to go from just barely fitting to the appropriate level of fit.
I used 2 regular hook command strips, which were strong enough to allow the remote to be removed, without pulling the holder off the wall, and to feel secure.