1 / 2
Paper Towel Mount for 1 inch PVC Pipe - Pegboard Hole Spacing — zdjęcie 1
1 / 2

Paper Towel Mount for 1 inch PVC Pipe - Pegboard Hole Spacing

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

If you enjoy my designs you can help me by simply installing Temu and joining for free using my Temu Associate…

Ocena
0 / 5
Polubienia
10
Pobrania
66
Wydruki
0
Wyświetlenia
379
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

If you enjoy my designs you can help me by simply installing Temu and joining for free using my Temu Associate link: https://temu.to/m/u35zqoy1w8m

Not only can you buy 3D printer items and parts needed to make my designs, you also get a really nice discount. Temu ships pretty quickly, the prices are really low, and the quality is very good. The credits I earn from referrals help me buy filament and publish more free useful designs.

I originally remixed of a different paper towel holder design but then discovered it did not fit PVC pipe correctly, did not hold the big rolls of paper towels I buy from Sam's Club, and the overall design was very bulky, so I created an entirely new sleeker design that uses a small section of 1 inch (outer diameter) PVC, which snaps in perfectly and fits a inside a standard roll of paper towels nicely.

This design has the holes spaced where it can be mounted on pegboard if desired, or the wall if you choose. The holes are designed so that drywall anchors rest into the recessed mount holes. If your drywall anchors are too long for pegboard (most people mount their pegboard with about 1/2 inch of space from the wall), simply cut about 1/4 inch off the tip of the drywall anchor.

The PVC snaps in and out of the mount easily to make changing the roll of paper towels easy peasy.

If you like my designs you can support me by buying your paper towels using the link below (As an Amazon Associate, I earn from qualifying purchases.): https://amzn.to/3sYBlDf

Or you can buy me a coffee: https://www.buymeacoffee.com/hrhkn9p4vh1

Thanks!

Print Settings

Printer Brand:

Voxelab

Printer:

Aquila X2

Rafts:

No

Supports:

No

Resolution:

0.2

Infill:

20%

Filament: Generic PLA Any


Notes:

As with all my designs so far, no supports are needed if you print in the correct orientation. Print two copies, one for each side.

Category: Kitchen & Dining

Tagi