Cylinda TS70 rack adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter securing the drying racks in the Cylinda TS70 drying cabinet
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 82
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a adapter to secure the drying racks to the cabinets. The original ones are made of plastic with a metal center piece. Unfortunately two of the original ones in my cabinet have split in the joint between the pin and the bracket. This is resulting in a rack that can only be fixed in the innermost position, it can neither be tilted upwards for when we want to dry towels or other larger items, nor slide outwards for easier access.
I printed them in ePA-CF from eSUN. Claiming heat resistance up to 120 degrees Celsius. The drying cabinet should never be hotter than 60 degrees, so I hope this will be sufficient. Time will tell I assume.
The model is the right one, so print one in the original direction, and one mirrored to get a pair.
The equivalent spare part from the manufacturer is E4319755 “HÄNGARPROFIL SOLID SILV”
Note: The ones I printed and was not 100% compatible with the tilt function. I corrected mine with a knife after mounting them in the drying cabinet. The model is updated and compatible.