1 / 6
Team Fortress 2 Black Box (Moving Parts) V1.1 — zdjęcie 1
1 / 6

Team Fortress 2 Black Box (Moving Parts) V1.1

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

On Hit: Gain up to +20 health per attack -25% clip size

Ocena
0 / 5
Polubienia
66
Pobrania
263
Wydruki
0
Wyświetlenia
2104
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Props
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Version 1.1
As per some requests, I had made the support blocks bigger, but also added holes for either four 3/16th inch rod that are 2 foot long, or four 5mm rods that are 407mm long for additional rigidity. The firing tube is elongated to save on filament.

Update October 2024: If there is enough demand I may do a revision of this to be more “accurate” or akin to the M202 Flash. 

“If you're lucky enough to sport the upper body strength to actually carry this monster, you can guarantee, after firing this half-a-ton hellraiser, it will be the only thing left that's not a smouldering pile of ash.”

A mostly accurate Team Fortress 2 Black Box that you can own now. Life size and with moving covers. Moving parts are mostly assumption based on the model and the weapon it was based off of: M202 Flash. For the hinge and the latch, you need 1.75mm filament as the hinge pin and 2 pen springs. Any pen spring should work but Pilot FriXion springs work best. 

Parts Required:
Printed:
1x Grip
2x Lever
1x Foregrip
1x Body 1 (Choose Strap or Strapless)
1x Body 2
1x Body 3
1x Body 4
1x Front Cover
1x Back Cover 
6x Body Pins

Other:
2x Pen Springs
1.75mm Filament

Do not brandish this as a weapon. This is only intended as a prop. 

Tagi