Cadillac Filament Dryer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
12 spool filament dryer using active heating from PTC heaters. This is assembled from a Voron v2.4 350 frame.
- Ocena
- 0 / 5
- Polubienia
- 64
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 2711
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- GNU General Public License v3.0
V2 updated files.
What I have here is what I like to call the Cadillac Dryer!
It is made from a Voron 2.4 350 frame and holds 12 spools of filament and can feed up to 12 printers with dry filament without the concern of your filament being impacted by the humidity in the air.
I have just updated it with a lot of new parts and they are listed in the files section.
It uses two 250w 24v PTC heaters to heat the chamber. It is controlled with klipper so the generic 3950 thermocouple is controlling the chamber temp. There is a relay that controls the power to the heaters so that the power supplies are not being cycled on and off when the heaters are called for. In the images you can see the AHT10 in the back corner that I use to monitor temp and humidity in the unit. Like I mentioned above the unit is controlled by klipper so you can use any pi, screen and mcu you choose. I used a BTT Pi, tft35 screen and a klipper expander mcu to control it.
The updated version has Trident stealth skirts on it but you can use any skirt system that you want that will fit the frame.
Links to all the major components are listed below.
If you have any questions you can reach me on discord. My username is skippy34
https://www.amazon.com/gp/product/B013ETVO12/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B09B1MZKYQ/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1
https://www.amazon.com/gp/product/B07R7PR72H/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Panels https://happy-manufacturing.com/