Tray for 100mm Coasters - with Fusion 360 project file
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple tray that holds about ten felt coasters with a diameter of about 100mm in diameter.
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 41
- Wydruki
- 2
- Wyświetlenia
- 148
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Just a simple coaster tray to store about ten 10cm in diameter coasters.
It's nothing special but handy.
I have used it for over two years. Just a few minutes ago, I thought, why not share this design with you? So here we go!
I stuck some rubber buffers under it to hold it firmly on my desk.
You can download the STL and the Fusion 360 project file and customize it to your liking.
Printing
The tray was printed in PETG with a 0.2mm layer height and a 0.4mm nozzle. No magic is involved.
Additional Support Information
Please consider following me if you like my work:
And if you feel like buying me a coffee to stay productive and creative, you can do so by sending me a tip via Printables or PayPal:
Or feel free to use one of the following affiliate links below - without additional or hidden costs for you, of course!
Generic Affiliate Links
Thank you very much, and happy printing,
Martin