Delack Enclosure - Modular Corner - Tool Holder for Mk4
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A place to hang the clippers, needlenose, scraper, hex/torx wrenches &c that come with the Mk4, on the DELACK enclosure.
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 65
- Wydruki
- 4
- Wyświetlenia
- 441
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
The “DELACK Enclosure Modular Top Corner” kit comes with a few containers, but I wanted a larger one to hold all the Prusa Mk4 tools in one place. This is the result.
I've tried to optimize it by moving the tools in order of use, e.g., the filament clipper in front of the needlenose pliers, based on more frequent usage. And the Philips screwdriver near the back, which I placed outboard of the nozzle cleaner so you're less likely to stick yourself.
In order to handle the two flat wrenches, I had to make the kit longer than the “standard” containers, so it will stick out a bit.
Note: because of the weight of the tools and the moment of force of gravity :-), two little magnets won't hold this shelf, so I'm uploading a merge unit - the corner mount and the tool holder as a single print. I still have the old one in case anybody wants to play (contact me), but note that one of the magnet holes is too small (from the original download of the moddable container)
Printed in PLA. You should probably not use any low-resolution or “draft” modes, else the tiny hole for the nozzle cleaner may implode.
Latest Update: 2023-12-21
Expanded the scraper slot to hold at least some of the “hex scraper” models out there.
Made the nozzle cleaner hole come through.
Straightened the shelf part so it prints properly.