Narrow cleaning tip for Jupiter vacuum cleaner taper 30,5mm to 32,5mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a narrow cleaning tip designed for Zelmer Jupiter iwth tapered end with diameters of 30,2 mm at the bottom and…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 171
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
This is a narrow cleaning tip designed for Zelmer Jupiter iwth tapered end with diameters of 30,2 mm at the bottom and 32,5mm at the top. Walls were optimized for 0.4 mm wide printing and being 1.6 mm thick should be more than strong enough for normal use.
It will most likely fit other vacuum cleaner tubes.
Just measure, print and enjoy!
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
50%
Filament: Polymaker Polyflex PLA Prusament Blue
Notes:
No special settings were used for this print. Just set line width to 0,4 mm and 2 wall lines and it should be good.
Infill doesnt really matter because there are only 2 spots where any infill is needed.
No supports needed
Category: Replacement Parts