1 / 4
200mm  Moon Surfing Girl with Light Box — zdjęcie 1
1 / 4

200mm Moon Surfing Girl with Light Box

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a combination of both Moon and resized Surfing girl

Ocena
0 / 5
Polubienia
16
Pobrania
64
Wydruki
0
Wyświetlenia
371
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Wall-mounted
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This was is a christmas present I put together for a family memeber.

I loaded the Light Box into Prusa slicer and loaded the Moon Surf Girl part to the top of the light box. I then split the model at about 25.8mm from the back pannel. 

Where I added pins to each of the 6. pieces. 

each part was printed sepertly. 

  • I printed the light box at 0.2mm layer height. 
  • the Moon Surfing Girl was printed at varation layer Height: all at 80% infill
    • 0.2mm layer height below moon surface at 15% infill
    • 0.07mm layer height for the Moon Lithophane at 100% infill (IMPORTANT)
    • 0.2mm layer height for remaining layers at 15% infill (with ironing enabled for topmost layer)

 

Learning Notes:

Liphophanes printed on Z-axis will string easily. causing the nozzle to contact with the print during travel. My retraction settings and/or Z-Hop settings need optimized. 

 

Tagi