1 / 1
Joiner and anchor fused, for Legend of Zelda Master Sword (BOTW) (TOTK) (Full scale)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
“Fused” the Joiner and Anchor, added some internal fill to make it more solid because it kept breaking.
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 230
- Wydruki
- 1
- Wyświetlenia
- 1081
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (20)Powiązane
Unprofessionally “Fused” the Joiner and Anchor, added some internal fill to make it more solid because it kept breaking. I personally printed it at 75% because I did not want it to break again. You can try it out with whatever infill you want. It worked for me without any modification other than breaking the supports away and taking supports out of the Guard Pin holes (which I eventually had to cut the Guard Pins in order to fit then properly.
