Airtag MOLLE /PALS holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here is a strong holder for the Apple Airtag compatible with MOLLE and PALS (25 mm / 1 inch webbing) systems.
- Ocena
- 4,636 / 5
- Polubienia
- 208
- Pobrania
- 716
- Wydruki
- 15
- Wyświetlenia
- 5582
- Oceny
- 11
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
Here is a strong holder for the Apple Airtag compatible with MOLLE and PALS (25 mm / 1 inch webbing) systems.
It is possible to put the airtag both ways, facing front or back (if you need to be able to stop tracking/bipping easily).
Printing instructions
I recommend using PETG or PLA.
I recommend printing at 0.3mm height max, on its side, no need for support (see screenshot).
Get it printed and shipped to you
If you don't have a printer, I uploaded it on Shapeways, so you can get it printed for you, plus the finish will be much better.
Buy me a coffee
If you appreciate my work, you can buy me a coffee. Appreciated !