The 100 Daylight Matchsticks
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
LED Matchstick mount for "the 100" 3D printer. One Mount for each which align to the print bed.
- Ocena
- 4 / 5
- Polubienia
- 9
- Pobrania
- 43
- Wydruki
- 2
- Wyświetlenia
- 880
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I adopted the design of the voron 0 matchstick holder from "Shielded mount for 'Daylight' LED stick for Voron0" by @C47_3 to fit to “the 100” printer.
There is a mount for each side of the upper gantry. They align nicely with the print bed. They do not interfere with the moving parts of the gantry (regular and lightweight version).
The holder replaces the upper outer mounting bracket of the 100. Therefore it should be printed the same way with 20% infill and 3 walls. This model needs supports (worked fine with tree supports).
For screwing the Matchsticks to the mount you need 2 M3x8 (or M3x6) screws each.
Optional: If your Matchstick has a switch in the center you can print the extender for the switch from the original model.