"DRIP" Enclosure Design/Swag
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted to further customize my "LACK Replica" Enclosure, but I couldn't seem to find any thing to do so.
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 59
- Wydruki
- 0
- Wyświetlenia
- 217
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
I really wanted some sort of design to further customize my Printer Enclosure. What I created was multiple “DRIP” patterns that I broke into 5" sections, roughly .125" thick. I made some with a ledge on the top that could be used for support, But I also made some that are just flat models also. The ledges worked better with my set up since I was mounting them on top of a .75" Thick x 20" wide cabinet door frame.
I experimented with different settings, ultimately I felt like running these with 20% Cubic infill gave me the best results.
Even with the different patterns I would suggest playing around with scaling and pattern combos to make it work for your application.
I plan on adding additional patterns in the future.