Bambu AMS Filament Buffer Tubing Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This part holds the PTFE tubing straight as it enters the filament buffer on the back of the Bambu X1 Carbon.
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 130
- Wydruki
- 1
- Wyświetlenia
- 1487
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I was having problems with my Bambu X1 Carbon loading filament from the AMS into the printer. The filament was getting snagged upon entering the filament buffer on the back of the machine and I was getting filament loading errors.
This part attaches to the back of the X1 Carbon using 5x5mm magnets and holds the PTFE tubing straight. This way, the filament in the tubing loads straight into the filament buffer. This solved my issue. If you're looking at this object, hopefully it helps you as well.
For this object, you will also need four 5x5mm magnets.