Gridfinity 4x5 Punch and Die tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This Gridfinity tray is for 5 MetalPro punch and die sets.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 207
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
I recommend printing this with 5 or more perimeters and similar top and bottom layers. Then gyroscopic 10% infill and you should get a pretty solid tool tray to hold your ironworker punch and die sets. The pics I am including show variable layer heights that I used to smooth the round bottoms of the holes the tools rest in. I just slid the layer height adjustment to the finest level in the bottom of the curves and to super course everywhere else. I was just trying to get the print done asap but still with decent visual quality.
Petg is my top choice for this build. It won't degrade in direct sunlight and holds up well to chemicals. The tools don't usually get hot enough to malform the tray.
Feedback is welcome. This is the first Gridfinity module I have tackled so let me know how yours turn's out if you print it.