Olfa SCR-S Scraper Guard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cover your sharps!
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 203
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple print-in-place hinged cover for the Olfa SCR-S. As far as I'm concerned it's the best scraper out there, but it is quite sharp out of the box. Keep your desk safe with this guard!
The hinge might take a little persuasion to get moving well but shouldn't require any insane tolerances to be functional. I included a few holes for 6x3mm magnets to keep the blade and the two sides of the guard held together, probably optional but I figured it would help the guard do it's job a little better.
I included a STEP as well as a multibody STL, feel free to remix to suit your needs. My logo should only appear if you ‘split into parts’ in your slicer, otherwise that face should print normally.
Have a good day!