Wagon-wheel Spool Insert (Overture)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Toothed 21mm wagon-wheel spool inserts for overture 55mm diameter cardboard spools. Design files included.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 214
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
I made this to fit on this microphone arm. The smaller center keeps the roll more balanced and easier to spin.
These are spool inserts for cardboard Overture rolls (~55mm diameter). Two variants: just the rim and a ribbed design with a 21mm diameter. No supports needed.
Design files are for SolveSpace and include a outer-rim, the ribbed center, and the assembly of both. STLs from SolveSpace were imported to PrusaSliver and re-exported to clean them up (SolveSpace often produces STLs with “repairable errors” that are just fine). To edit the dimensions should be fairly easy; so have fun – I thought these might make a nice reference for someone that is not just Fusion360 or FreeCAD files from a much simpler system.