1 / 3
Uniden baby monitor mount — zdjęcie 1
1 / 3

Uniden baby monitor mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mount for Uniden BW105 baby monitor onto end rail of Boori cot.

Ocena
0 / 5
Polubienia
1
Pobrania
48
Wydruki
0
Wyświetlenia
405
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Attribution

Model is in two parts. One part is a twist lock attachment to the bottom of the monitor. This is a separate part to ease printing and also to allow the bottom bracket to be changed. 

The bottom part slips onto the curved rail of the cot. It angles the baby monitor down 15 degrees. 

Original intent was to glue two parts together but the fit was good enough so that was not required. 

Printed in PETG with cubic infill, but any material should work. 

Tagi