EKWB EK-Vardar X3M fan Stand Off
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spacers so you can mount other stuff to a EK-Vardar X3M fan like a regular fan.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 203
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
the design of the EK-Vardar X3M fans are made to look slick mounted against radiators and not much else. With this spacer you can mount things like brackets and fan shrouds, like a normal fan. The 20mm will clear the rubber pads and the 26mm should clear the whole fan if needed. I made it so I could mount a D5 pump bracket to the fan as if it were a regular fan. more pics to come (if I remember).
you may have to change the orientation
To use: just pop out the plastic support in the rubber corner piece and push in the stand off in as pictured. there is a 2mm ridge that will keep it in place.
I have not used these yet, however, I will probably forget to post this if it's successful or not so here it goes. more pics to follow if I remember.
Update: as you can see it's a bit problematic for the fan's air flow but it help up a TBE 300 D5 pump-res just fine. maybe need to maybe extend it out a bit and get longer M3 screws.