Hinge shim for Andersen brand exterior door
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
If your door is rubbing on the bottom edge, and there is no more adjustment left on the hex set screw on the door-side…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 185
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
If your door is rubbing on the bottom edge, and there is no more adjustment left on the hex set screw on the door-side hinge, simply add this between the lower hinge and the door frame to raise it. Usually 1 does the trick. If you use two on the bottom, you might want to add one behind the middle hinge. Do them one at a time - you might need help lifting the door to realign the hinge when reinstalling - they're heavy.
Please be careful - I am not responsible for injuries due to improper safety observations.
If you aren't sure - get a skilled tradesperson to put them in for you.
PLA+ works well.
I printed it with Luban on a Snapmaker J1s
Andersen is a registered trademark of Andersen Door and Window Co.
Category: Outdoor & Garden