Star Watcher Star Adventurer Polar scope illuminator.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A polar illuminator for your Star adventurer that you can keep in place.
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 47
- Wydruki
- 1
- Wyświetlenia
- 618
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
Moving my designs over from Thingiverse…
A fairly simple polar illuminator for the Skywatcher Star Adventurer star tracker, using the following as the starting point.
https://www.thingiverse.com/thing:2592940
This fits with the dovetail in place and runs off a single CR2032 button battery.
You will also need a 3mm Red LED and a 1K2 1/4W or 1/8W resistor (although you may play around with the resistor value to achieve a brightness level that fits your needs). A couple of small lengths of heat shrink were also used to prevent shorting the battery.
Solder the resistor to the Anode(Long) leg of the LED and bend the remaining wires so that the other leg of the LED sits just off the -VE face of the battery.