3/8" Socket Wrench Organizer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These socket organizers were inspired by using socket sets on the deck of a sailboat. You want them to stay together…
- Ocena
- 3,667 / 5
- Polubienia
- 36
- Pobrania
- 292
- Wydruki
- 1
- Wyświetlenia
- 2404
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
These socket organizers were inspired by using socket sets on the deck of a sailboat. You want them to stay together and not roll off - nor rust. The sockets, extensions, and wrench will stay on the holder and resist removal unless tilted in a particular direction (in this assembled case away from the red line) and then easily pull off. It is for 3/8" drive sockets and has progressively larger spacing to accommodate the increasing size of sockets. The ratchet itself can be stored with the sockets. NOTE FILAMENT MATERAL: Needs to be somewhat plastic and not brittle like PLA.
Print Settings
Printer Brand:
LulzBot
Printer:
TAZ 5
Rafts:
No
Supports:
No
Resolution:
0.6 nozzle
Infill:
100%
Filament: taulman transition nylon black
Notes:
Print with print cooling fan off. Print the clips on their sides to take advantage of the x and y strength and avoid the z layer fatigue and cracking. Make sure the horizontal expansion offset is calibrated for your printer and nozzle.
Category: Hand Tools