1 / 3
Stackable Brick Bank
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stackable Brick Bank for all your coin storage needs
- Ocena
- 4,429 / 5
- Polubienia
- 226
- Pobrania
- 600
- Wydruki
- 7
- Wyświetlenia
- 2661
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 7) (Komentarze: 9)Remiksy (0)Kolekcje (293)Powiązane
Stackable Brick Bank for all your coin storage needs.
Models
The Stackable Brick Bank comes in three variations
- Standard: Approximately a 5x-sized 2x2 Lego brick. Internal shape helps coins shake out nicely through the top hole.
- Threaded: Same as standard but the bottom center screw opens for easier coin removal. For this shape print both the “Body” and “Plug” files.
- Flat: Flat bottom. Top still looks like a Lego brick, but needs no supports. As a bonus, interior storage is increased.
Printing
- The Stackable Brick Bank is designed to be printed with no internal supports
- For standard and threaded varieties, supports will be needed on the bottom
- If you use “Automatic painting” for the supports, make sure it does not try to add supports on the inside - they are not needed and would be really hard to remove