1 / 6
Fly Fishing Belt Bolt-on Jacket Landing Net Holder — zdjęcie 1
1 / 6

Fly Fishing Belt Bolt-on Jacket Landing Net Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The eye on the back of my fly vest was difficult for me to hook it into ( Arthritis ) so I came up with this.

Ocena
0 / 5
Polubienia
7
Pobrania
32
Wydruki
0
Wyświetlenia
908
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

The eye on the back of my fly vest was difficult for me to hook it into ( Arthritis ) so I came up with this stronger easier to locate replacement which clamps to the fabric of the vest / jacket etc... I also made it so I could slide or clamp it to a belt or strap and also fitted another one in a cupboard to store my nets.

Its probably got more uses than I have listed so let me know if you have used it for something other than Fishing?

PARTS NEEDED

I used 5mm x 25mm Dowel Pins ( slight Chamfer on ends ) 304 Stainless Steel ( eBay )

4x m3 Countersink machine screws and nylock nuts length to suit your needs ( eBay )

PRINTING OPTIONS

I printed this in PETG at 0.2 and 100% infill

I set the printer to do a filament change at the height one layer before the support across the hole for the pin - paced the pin in the continued the print.

The only support needed is under the 4x holes in the main front stl.

FITTING TO FABRIC

I used a Scratch Awl / Bradawl ( pointed metal bar ) to separate the fabric weave before bolting them together.

If you need a version with something changed / added let me know I am always happy to help out when I can.

Please comment - like - share

Happy Printing

Tagi