Ham HT Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
2020-02-16 Added new version with front stabilizing lip. This should help with front heavy HT's from falling over.…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 274
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
2020-02-16 Added new version with front stabilizing lip. This should help with front heavy HT's from falling over. Enjoy!
I left the old version in case you like it better. You choose...
This is a HT stand I created over about a year of iterations. I made circles on the bottom for flat rubber feet. I also position one rubber foot to grip the HT clip on the back.(see photo) This made it much easier to adjust a good grip for different radios.
In one case, instead of rubber feet on the base, I epoxied Sonicare toothbrush magnets in place of the rubber feet. After toothbrush needs replacing of course! This stand works great with my ammo-can go-boxes!
73,
WA6ED
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
50-100%
Filament: Overture PETG Black
Notes:
With my Prusa MK3S, I have successfully printed this stand many times from the bottom. I use PETG with standard PRusa slicer settings. I carefully use a heat gun to remove strings that are common with PETG. Gorilla duct tape works too!
Category: Electronics