Redline Airsoft Firebase regulator tournament lock.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A regulator tournament lock for the Redline Airsoft Firebase regulator. Accepts Padlocks and zip ties.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 286
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A regulator tournament lock for the Redline Airsoft Firebase regulator. Accepts Padlocks and zip ties.
My local airsoft site requires a tournament lock for regulators. This reg is quite old and doesn't really lock in a very safe manner. This 3d printed tournament lock uses both zip ties and optionally 2 padlocks(4.2mm Shackle diameter).
Padlocks used: Yale Keyed Padlock, Body Width: 25 mm, Body Height: 26 mm, Body Depth: 11 mm, Shackle Diameter: 4.2mm
Print settings:
Layer height: 0.16 - 0.28mm (Doesn't really matter as long as you can print the overhangs easily.
Supports: Recommend organic/tree supports from buildplate only.
Walls: 5+, You want this as solid as possible incase it get's shot by a BB.
Place the ‘Top’ piece upside down on the large flat surface.