Tolerance test for 6x2mm magnets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Quick tolerance test for testing the fit of 6x2mm magnets.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 115
- Wydruki
- 0
- Wyświetlenia
- 460
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Lately I have been using a lot of 6x2mm magnets for Gridfinity storage solutions as well as designing some electronic control housings with removeable lids. I wanted a quick tolerance test to see whether my CAD designs should have 0mm tolerances (= a hole with exactly 6.0 mm diameter) all the way up to 0.5mm tolerances (= a hole with 6.5 mm diameter).
Turns out with my current PLA filament and settings on a Bambu Labs X1C, I can fit a magnet with 0mm tolerance using firm pressure (ie. a jig or pliers to squeeze the magnet in), while with 0.1 - 0.2mm tolerance I could use finger pressure to fit the magnet in. At 0.3mm+ tolerances, the magnet was too loose and would be easily dislodged out of the hole.