Hanging Medals for Shirt
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Medals intended to be hung from a ribbon and used with a costume with hole in back to put a washer for weight.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 156
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Costume Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
A friend of mine requested some circular medals for a cosplay that were slightly larger than a quarter and had a loop at the top that he could thread some ribbon through. He also requested a hole in the back of the medal deep enough to put a washer for weight so it looked heavier.
Based on the example pictures he showed me some were flat and some had a raised surface to them. I also made one with a recessed surface for variety.
Printed on Bambulabs X1C. Supports will be required due to the hole in the back on each of them. Default settings used otherwise.