Door hook for coats and jackets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Door hook for coats, jackets or anything you want!
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 63
- Wydruki
- 1
- Wyświetlenia
- 257
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
Door hook for coats, jackets or anything you want!
Update 02/12/2023
Added a "V2" design which has the hook angled at appro. 66°. This should make the design a little stronger.
There are two designs:
1 to fit doors of approx. 44.5mm thickness and
1 to fit doors of approx. 35mm thickness.
This hook has been designed to fit my door (44.5mm thick), it can be used in a thinner door but it will be a bit lose and may not work properly.
Very strong and can even hold multiple jackets at the same time with no issues.
I would recommend using a brim as it has the tendency to lift off the bed if you're only using a raft.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.20
Infill:
25%
Filament: eSun PLA Green
Category: Organization