TPU sleeve compatible to heat_it insect byte healer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I didn't like the Heat_it device that comes with clamps on the side, as it has received negative feedback on Amazon.…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 292
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Share Alike
I didn't like the Heat_it device that comes with clamps on the side, as it has received negative feedback on Amazon. However, I found a smaller version (referred to as the 2021 version) on the manufacturer's eBay shop, which includes a silicone sleeve.
I noticed that the silicone sleeve is also prone to loose the dongle, so I designed a sleeve that encapsulates everything securely.
To ensure a successful print with TPU, I opted not to use retraction. Instead, I printed the 'SleeveCutOpenWithKnife.stl' model and modified the top by cutting it open to insert the dongle. If you don't have any concerns about stringing, you can print the 'SleeveWithCutout' model.
To eliminate the holes in the remaining parts of the sleeve, I heated the end of a 4mm drill and carefully poked it through the stringing.
Print Settings
Printer:
BLV MGN
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2
Infill:
100%
Filament:
ABC TPUBlue
Notes:
This is a Note which seems to be neccessarily now.
Category: Mobile Phone