1 / 10
Scrooge McDuck-Inspired Piggy Bank with Night Light Feature — zdjęcie 1
1 / 10

Scrooge McDuck-Inspired Piggy Bank with Night Light Feature

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A Fully Customizable Personal Money Bin That Would Make Scrooge McDuck Proud.

Ocena
0 / 5
Polubienia
30
Pobrania
84
Wydruki
0
Wyświetlenia
1139
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Home Decor
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Scrooge McDuck-Inspired Piggy Bank with Night Light Feature

Embrace the charm of Scrooge McDuck's Money Bin with our unique piggy bank, featuring a creative "Money Wall" to avoid the emptiness of a new bank. It includes a plug for a tealight, doubling as a cozy night light. There are different walls with different sings to choose from.

Materials I used:
- Main Pieces: PLA
- Money Wall: Alternate Material

Printing Guidelines:
- Supports: None required.
- Customization: Use the "Money Wall With Dollar and Name Plate" for personalization. Add your name using slicers like PrusaSlicer or Orcaslicer.
- Multi-Color Printing: Insert color change stops at relevant layers for varied color prints.

Money Wall Printing:
- Settings: 100% infill, 0.08mm layer height, 0.2mm base layer.

Filaments:
- PETG Transparent
- PETG Translucent Gold
- PETG Yellow
- PETG Light Green

Color Swap Schedule:
- Start with Transparent.
- Layer #15 (1.32mm): Switch to Gold.
- Layer #16 (1.4mm): Change to Yellow.
- Layer #22 (1.88mm): Switch to Green and continue.

Components:
- Top and bottom parts, 4 side pieces, 4 walls, 1 plug.
- Optional: Extra top part for an authentic look.

Assembly Steps:
1. Insert four 5mm filament pieces into the corners of the top and bottom parts.
2. Attach side pieces to the bottom, add walls, and secure the top.
3. For a traditional appearance, add the optional extra top piece.
4. Secure with glue if desired for a permanent setup.

Pre-Printing Tip:
Test print the Connection Test and Side model to ensure filament hole sizes are appropriate. If adjustments are needed, either scale the test model accordingly or use the "Hole Compensation" feature in your slicer for size adjustments.

Scale the plug in the Z axes for a tighter fit.

Edit: I added a wall with a Euro sign.

Tagi