Endcap Mount for V400 Speeder Pad Adjustable Arm Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Combine with JLCURTIS's V400 Speeder Pad Adjustable Arm Mount to mount the pad off the top of the column.
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 43
- Wydruki
- 1
- Wyświetlenia
- 372
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Had been using JLCURTIS's V400 Speeder Pad Adjustable Arm Mount but when I got the FLSUN v400 Enclosure it was no longer compatible. I had to find another method of mounting the speeder pad because the enclosure panels utilize the column channels to slide in/out of position.
REIFY 3D thankfully had designed the FLSun V400 enclosure extrusion end cap permitting the enclosure panels to slide up and down inside the channels.
By combining the 2 designs I was able to mount the speeder pad to the top of the channel and still retain full functionality of the enclosure.
The added thickness for greater stability means you will need to use longer M5 screws. I used (2) M5x12.