1 / 6
Diffuser Cone for Orbital Christmas tree - Now with "trunk" — zdjęcie 1
1 / 6

Diffuser Cone for Orbital Christmas tree - Now with "trunk"

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is an accessory for the orbital Christmas tree posed by function.3d. It incorporates an LED "puck" for lighting

Ocena
0 / 5
Polubienia
9
Pobrania
51
Wydruki
0
Wyświetlenia
491
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a light diffuser (with “stars”) that illuminates the inside of function.3d's Orbital Christmas tree. it uses an LED Puck of 70 MM diameter. In this edit, I have added a sleeve that holds the puck and a second sleeve that makes a bark-looking “trunk” for the tree.

All parts are PLA @0.3 layer height and 15% infill. The cone requires support but only on the area that reasts on the puck (not the cone part).

The “wood” sleeve was printed using Amolen PLA+wood in Walnut (https://amolen.com/products/amolen-wood-pla-filament-1kg1-75)

the link for the LED “puck” is : https://www.amazon.com/dp/B01MFH7X2P/

 

 

Tagi