The Prusacaster - a 3D printable guitar updated core (middle piece)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I changed the depth op the bridge electronics to 27mm deep to fit the new model.
- Ocena
- 0 / 5
- Polubienia
- 61
- Pobrania
- 207
- Wydruki
- 2
- Wyświetlenia
- 5587
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I changed the depth op the bridge electronics to 27mm deep to fit the new model.
I am testing this remix at the moment so there is no guarantee that it will work 100%, I will also examine the part over time for bendage (material creep) and update the text your reading now with the new text.
Update 5/05/2024:
The latest i bought was in december 2023 so if you bought it around than, you should be good, I don't know if they came out with other versions now. I have my prusacaster now for 6 months, the body didn't bent (yet) so your good to go normally!?