Molecular Sieve Stand - PCP Tuxing HPA Compressor stand for Vevor/Yong Heng
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tuxing Molecular Sieve stand for PCP Vevor/Yong Heng Compressors
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 474
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Designed for this molecular Sieve but can work on any that have a diameter of about 50mm. Standing the sieve up is important for saftey as it reduces the amount of moisture and water that can end up in your tank.
The model this is remixed from is weak and falls over when your compressor starts going. I strengthened it with a cup that holds the sieve as the airlines tighten up quite a bit once there is pressure in the lines.
Printed in PETG - Probably fine in PLA but use a lot of walls, I personally utilized 100% infill. needs supports for cup portion.