Enclosure for the open-source usb-sniffer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
I designed this enclosure to enclose the PCB for the open-source project usb sniffer project that is available at https://github.com/ataradov/usb-sniffer
I wanted something that was functional and looked clean and tiny and this is my result.
I purposely printed the body in the prusa orange so that it would be easy to find on my desk, I'm forever losing stuff so this seemed like a good idea, the caps I printed in black to provide a nice contrast.
Everything fits nice and snugly with the V6 version of the project.
I printed in PET-G and the two face plates are held in place with 4xM2 screws, you will need 4 M2 heat set inserts which the screws will screw into providing a nice fit.
I printed with a 0.2mm layer height, the orange was prusament and the black was a basic cheap PET-G from Amazon.