Ubiquiti EdgeSwitch Alternative Power Supply Adaptor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
ES-8-150W Alternative Power Supply Adaptor
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 282
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
Like others, I got a power supply failure on a ES-8-150W. Unfortunately, solutions on linked threads are based on an obsolete part (Mean Well ASP-150-48).
The best replacement I found is Cincon Electronics CFM150S480-B. However, it's a bit smaller and has a different power connector.
For power connection, you can remove inserts from JST connector and plug them in this one, just beware of polarity (opposite of previous connector).
To maintain the convertor in place, I 3D printed in PETG a very basic adaptor and used CNCKitchen M3 x 5.7 inserts and M3 Screw to attach maintaining bars.
Holes under 4 squares are larger and allow the adapter to clip on metal plots of the switch. You can then use screws that came with the previous convertor.
I figured out it might help someone with the same problem. You will find attached the STL files.