Kusba Accelerometer Sprite Extruder SE mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I based my design on the original, but I remodeled it completely in freecad, I am attaching the freecad and STLs (you…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 501
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I based my design on the original, but I remodeled it completely in freecad, I am attaching the freecad and STLs (you can make fun of my modelling, I am still learning!)
I also included a STL to create a couple of plastic washers you can put under the Kusba if your screws are too long.
The captive nuts are a very tight fit intentionally so and I used a vice to jam them in and then they never come out
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
0.28
Infill:
15%
Notes:
I have attached a photo of the supports I configured and the orientation of the model for printing.
Category: 3D Printer Parts