NZ Guess Who Circa 1987 Replacement Character Frame
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The european version was almost correct except for the top piece which obscured more of the character picture than was…
- Ocena
- 4 / 5
- Polubienia
- 9
- Pobrania
- 91
- Wydruki
- 2
- Wyświetlenia
- 738
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
The european version was almost correct except for the top piece which obscured more of the character picture than was ideal.
So I remodeled the top piece in freecad, and slightly modified the bottom piece.
Ive included the STLs and freecad project files for convenience.
Also this model for point scoring seems to be a pretty good match from the picture on the front of the box, (all the original pieces have disappeared), so I printed this model x 9 in yellow :-)
https://www.thingiverse.com/thing:1903077
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
25%
Filament: Generic PLA White
Notes:
Change the orientation of the bottom_and_hinge_3_nz.stl to be flat on the build plate before printing.
Its a bit of a tight fit for the bottom piece on the axle, I don't have the time to remodel the bottom piece as well to try, but I think a bit of sand paper will help.Category: Games