Windshield cone scraper/funnel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
No supports needed. Also a funnel for windshield liquid. Optional ice scraper.
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 72
- Wydruki
- 2
- Wyświetlenia
- 370
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
No supports needed. Use it as funnel for windshield liquid, as I always end up spilling liquid over the motor internal parts. :)
This is big, 14 cm in diameter, to clear faster the windshield.
Print the optional ice scraper. ( with ice breaking pins upside )
I did it based on a commercial product which seems to be appreciated. I tried to make it strong and thick. My choice of settings are: 0.2mm layer height, 3 walls, 4 top/bottom layers, 30% adaptive cubic infill.
Use a big brim, to be sure it sticks to the bed till the print ends.
This is one review I've found on Youtube.