Volkswagen ice scraper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Rounded Toothed Scraper
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 62
- Wydruki
- 1
- Wyświetlenia
- 437
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
I looked at the other round scrapers and realized what I was missing in them.
So, the first is a bulging angle for cleaning in the corners of the windshield, the second is a toothy bottom for severe cases of freezing, thick ice crust, the third is a slightly different shape so that it is more convenient to use thick gloves.
The place under the logo is 3cm in diameter, so you can model and place your car logo on the handle.
I printed the PLA, I don't know yet how it will behave in the cold, we'll see. At least three contours, the bottom - 4 or more layers, the top - 3 is enough. Layer height - 0.2-0.3 mm, line thickness -0.4 or more.
The logo was printed with a layer thickness of 0.1.
I hope you like this model. Good luck!