Content indicator for small parts organizer cabinets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Place a sample of the screws in a drawer to the drawers front to see what is inside at a glance.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 285
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
There are 2 sets of stl-files, one for machine screws (ms...stl) and one for wood screws or other things (ws...stl). Each set has 2 groups. One group with 8 mm between the 2 eylets for short screws, indicated with ...-s.stl and one group with a distance of 16 mm without indication.
In the groups for machine screws there is each one file for diameter M3 - M8. The shape of the eylets is circular.
The eylets for wood screws have an elliptical shape that can expand slightly and so covers a diameter range of 2 mm. The files are indicated e.g. as ws-3-4mm.stl.
There is a wider and a smaller eylet on each part. Insert your screw through the wider eylet and screw it carefully into the smaller one.
On my small organizer cabinet the parts fit into the frame for the label. On other drawers or boxes you can use double sided adhesive tape or a drop of glue.
For the print you should prefer PETG. PLA may do it for the moment, but may get brittle after some time.